M6 6.5-inch Marine Enclosed Coaxial Speaker System with Transflective™ LED Lighting (75 W, 4 O) - Gloss White Enclosure, Gloss White Trim Ring, Gloss White Sport Grille
Ideal for powersports, marine and off-road vehicle applications, these enclosed speaker systems include our maximum-performance, M6 6.5-inch marine coaxial speakers with silk dome tweeters housed in rugged, injection-molded enclosures to deliver clean, loud audio.
A rotating clamp receiver is included with each VEX™ pod to mate with an appropriate fixture (sold separately) for mounting to a flat surface, roll-cage or tower structure, allowing precise aiming for optimum sound. Pipe mounting fixtures (sold separately) are available in a variety of sizes to fit a wide range of tube diameters.
The patent-pending Transflective™ RGB LED technology emits a smooth lighting effect through the woofer cone, with a choice of several lighting colors. Add an optional RGB controller to create thousands of color variations. Professional installation is strongly recommended.
The enclosures feature a decorative, aluminum logo cap on the end opposite the speaker, which can be oriented to match any custom mounting application. For convenience, ten feet of our 6-conductor, multifunction cable is included with each VEX™ pod for making speaker and illumination connections.
Although VEX™ pods can be used with as little as 25 W per channel, we recommend powering these systems with an amplifier capable of 75-150 W of continuous power per channel. For best results, use with a subwoofer.
Like all JL Audio marine speakers, this system is weatherproof and built to deliver years of listening enjoyment.
Sold as a pair.
|Continuous Power Handling (RMS)||75 W|
|Recommended Amplifier Power (RMS)||25 - 150 W / Ch.|
|System Efficiency||89.5 dB @ 1 W / 1 m|
|System Nominal Impedance||4 O|
|System Frequency Response||100 Hz - 25 KHz ± 3 dB|
|Enclosure Diameter (A)||7.03 in / 179 mm|
|Enclosure Depth (B)||6.17 in / 157 mm|
|Height including Mounting Clamp Receiver* (C)||7.27 in / 185 mm|
|Mounting Clamp Receiver / Enclosure Offset (D)||0.20 in / 5 mm|
*Mounting Clamps Required (Sold Separately)