Are you tired of having the same old Polaris RZR XP 900 everyone else has? Or are you tired of those bracket "lifts" everyone else is running? Well now you can set your RZR XP 900 apart from the crowd with the 7" suspension lift from S3 Power Sports! 7" ground clearance over factory is what you get if you simply bolt our lift on and leave the factory tires on. If you adjust the preload and run some 32" tires, you can get up to 12" of ground clearance over stock!! The lift kit is 2" forward in the front and the arms are 2" wider than factory. The rear has a Monster 4" rake that really allows that rear suspension to droop out in deep ruts! The lift consists of 4 custom axles, all .120 wall DOM steel tubing, 5/8" heim joints, custom machined misalignment spacers, custom machined ball joint cups, all necessary hardware and brake lines for the install. The standard lift comes equipped with high clearance trailing arms and straight front lower a-arms and rear lower radius rods. This high clearance edition is where you really get the clearance! We custom built lower front a-arms and lower rear radius rods to get the very most ground clearance we could get out of this kit! This high clearance edition is designed for the serious off-roader and mud rider!
This item includes S3PowerSports Lifetime Structural Warranty.