Axia Alloys Clamp Size Guide
Find your machine
Select your brand below to see factory cage sizing references. All round tubing measurements are outside diameters in inches.
Confirm your mounting location before ordering. Crossbars can differ from the main cage. These references do not apply to aftermarket cages.
Polaris
| Machine | Main cage | Top front crossbar |
|---|---|---|
| 2022+ RZR Pro R / Pro R 4 | 2" | 2" |
| 2026+ RZR Pro S / Pro S 4 | 2" | 1.75" |
| 2022+ RZR Turbo R / Turbo R 4 | 2" | 1.75" |
| 2020+ RZR Pro XP / Pro XP 4 | 2" | 1.75" |
| 2024+ RZR XP / XP S, including 4-seat versions | 1.75" | 1.50" |
| 2011–2023 RZR XP / XP Turbo, including 4-seat versions | 1.75" | Measure |
| 2022+ RZR 200 | 1.50" | Measure |
| 2016–2019 General / General 4 | Profile clamp | 1.75" |
| 2020+ General XP / General XP 4 | Profile clamp | 1.75" |
| 1999–2012 Ranger / Ranger Crew | 1.75" | Measure |
| 2013+ Ranger family | Profile clamp | Flat-surface or bolt-on mount; drilling required |
2025 Pro S: Axia’s current chart starts its Pro S reference at 2026. Measure your 2025 mounting location or contact us before selecting a clamp.
Xpedition: Axia currently lists no dedicated cage clamp. Its flat-surface mounting option requires drilling and a suitable installation location.
Can-Am
| Machine | Main cage | Other locations |
|---|---|---|
| 2024+ Maverick R | 1.85" | Top front crossbar: 2" |
| 2017+ Maverick X3 | 1.85" | Top front crossbar: 1.50"; rear harness bar: 2.50" |
| 2018+ Maverick Sport / Trail | Profile clamp | Other cage tubing: 1.85" |
| 2021+ Commander | Profile clamp | Other cage tubing: 1.85" |
| 2010–2020 Commander | 2" | Measure other locations |
| 2016+ Defender | Profile clamp | Measure other locations |
Kawasaki
| Machine | Main cage | Top crossbars |
|---|---|---|
| 2026+ Teryx4 H2 / Teryx5 H2 | 2" | 2" |
| 2020+ Teryx KRX | 1.75" | 1.50" |
| 2008+ Teryx / Teryx S / Teryx4 | 1.875" | 1.70" |
H2 sizing differs by location: harness bar 1.25" round, grab handle 1.25" square, rear angled tubes 1.75" round. For Ridge models, measure or contact us.
Honda
| Machine | Main cage |
|---|---|
| 2019+ Talon 1000 X / R | 2" |
| 2016+ Pioneer 1000 | 1.75" |
| 2014+ Pioneer 500 / 700 | 1.625" |
| 2008–2013 Big Red MUV700 | 1.625" |
Measure crossbars and other mounting locations separately.
Yamaha
| Machine | Main cage | Top crossbars |
|---|---|---|
| 2016+ YXZ1000R | 1.75" | 1.50" |
| 2016+ Wolverine / X2 / X4 | 2" | 1.50" |
| 2021+ Wolverine RMAX 1000 | 2" | 1.50" |
| 2004–2012 Rhino | 1.75" | 1.50" |
For Viking models and any model year not clearly covered here, measure your mounting location or contact us.
Arctic Cat & Speed UTV
Arctic Cat Wildcat XX, 2018+: main cage 1.75".
Speed UTV, 2021+: main cage 1.75", B-pillar 1.50", intrusion bars 1.25".
For other Arctic Cat models, measure or contact us before ordering.
Machine references adapted from Axia Alloys’ factory cage guide, checked October 16, 2026. A listed tube size does not guarantee that every accessory will fit that location. Confirm clearance, clamp availability, and accessory requirements.
Choose the right clamp for your Axia Alloys accessory by measuring the tubing where you plan to install it.
How to measure your roll cage
- Measure the outside diameter of the tubing at the exact mounting location. Calipers work best.
- If you use a flexible tape, measure around the tubing, then divide that measurement by 3.1416 to calculate the diameter.
- Match your measurement to the fit ranges below, then select that size on the product listing.
Measure before ordering: Different sections of a cage can have different diameters. Aftermarket cages, bends, and mounting locations may require different clamp sizes.
Round tubing clamp sizes
All measurements below are in inches. These ranges apply to Axia Alloys round tubing clamps.
| Clamp size | Tubing outside diameter |
|---|---|
| 0.75" | 0.745–0.760" |
| 0.875" | 0.870–0.890" |
| 1.00" | 0.995–1.020" |
| 1.125" | 1.120–1.140" |
| 1.25" | 1.240–1.270" |
| 1.30" | 1.290–1.320" |
| 1.375" | 1.365–1.400" |
| 1.50" | 1.490–1.525" |
| 1.575" | 1.565–1.600" |
| 1.625" | 1.615–1.650" |
| 1.70" | 1.690–1.725" |
| 1.75" | 1.745–1.785" |
| 1.85" | 1.840–1.880" |
| 1.875" | 1.865–1.905" |
| 2.00" | 1.990–2.030" |
| 2.125" | 2.120–2.150" |
| 2.25" | 2.240–2.270" |
| 2.375" | 2.370–2.395" |
| 2.50" | 2.490–2.520" |
| 2.625" | 2.620–2.640" |
| 2.75" | 2.745–2.765" |
| 2.875" | 2.870–2.890" |
| 3.00" | 2.995–3.015" |
| 3.25" | 3.245–3.265" |
Profile cages and square tubing
Round clamps are not the correct choice for every cage. Profile cages and square tubing require the appropriate clamp design. Some Axia accessories offer PF-IN or PF-OUT profile clamps; choose the orientation required for your accessory and mounting location.
Before you order
- Check the sizes available on the specific product listing.
- Confirm whether clamps are included and how many you need.
- Check clearance around roofs, windshields, doors, and other accessories.
Need help? Call Trail Star Audio at 651-353-7588. Have your accessory information and tubing measurement ready.
Clamp fit ranges sourced from Axia Alloys’ official size guide. Guide checked October 16, 2026. Always confirm your mounting location and the requirements of your specific accessory.